Shackleton Dome: Is a Domed Lunar City Possible?

What it will take to build a 25-mile-diameter, 5,000-foot-tall domed lunar city
Lunar Domed Settlement space art by Pat Rawlings
Domed lunar settlement illustration by Pat Rawlings, courtesy NASA.

By Edward McCullough

From Ad Astra, Volume 20 Number 4, Winter 2008
See also: Viral Architecture for Lunar Settlements

For decades, engaged participants in the space industry have been looking to the future, and within that future, to the viability of large-scale human colonies in the near and far reaches of space. Early ideas were science fiction, but engineering and ingenuity have caught up with the ambitious hopes of a spacefaring civilization.

Around 2005 an illustration of a domed lunar city 25 miles in diameter and 5,000 feet tall over Shackleton Crater began circulating in briefings at aerospace conferences. At first glance, this domed community seemed structurally impossible. However, materials such as basalt fibers and S-glass, among others, could make this type of structure possible.

The Big Idea

The total mass of silica in the concept of this dome is approximately 1.6 x 1010 tonnes. Completion of the dome in about 15 years would require mining rates on par with helium-3 production, which involve excavation, processing, and manufacturing rates approaching 250,000 tonnes per hour. For instance, the mining capability for tar sand at a typical facility is about 28,000 tonnes per hour.

Basic parameters for the dome

  • Size: 25 miles in diameter/5,000 feet tall
  • Main components:
    • Dome
    • Anchoring system
    • Maintenance systems
    • Catastrophic repair facility
  • All assembly is via autonomous robotics
  • All glass is manufactured in layers to enable thermal stress control
  • Basic unit is a hexagonal pentagonal surface patch of glass with a titanium frame that interlocks with similar units
  • Dome is anchored to bedrock
  • Shield glass module is two to three meters thick
  • Internal and external lattice work along with scaffolding for assembly

Given that we are currently in the midst of a technological revolution, the lunar production rates required to construct a dome are well within reach once space manufacturing is established on the Moon. From a purely pragmatic standpoint, the magnitude of any lunar settlement project would necessitate the utilization of autonomous robotics to reduce costs, and to ensure both safety and an acceptable timeline for completion. Construction could begin in 20 years and be finished 15 years after that.

Dome engineering can be performed by many architecture and engineering firms. The opportunity for innovation at engineering firms doing this kind of work could reenergize science and math education here on Earth.

The original city must be created underground. The city will consist of several sections connected by a transportation system of commuter rail lines. As underground infrastructure expands, subscale domes of increasingly larger size will be built and integrated into the system. The dome itself will be a substantial structure and, when complete, will allow for the actual living, recreation, and business quarters for the first lunar settlement.

Large-scale Lunar Colony

The Moon provides an excellent testing ground for space settlement as well as many opportunities for scientific advancement. Because the Moon’s atmosphere is a near vacuum, it is useful for science, manufacturing, production, and ballistic transfer. It provides heat sources and sinks, an exotic atmosphere, and volatiles for resource utilization. The regolith contains comminuted basalt and anorthosite, and the terrain is covered with cliffs, valleys, and craters, which can be exploited for energy generation. In addition, the ultra dry conditions on the Moon are supportive of electrostatic effects for material handling and classification. The relatively still surface provides an excellent platform for observatories. Finally, the Moon’s face is shielded from Earth’s electromagnetic noise, providing an uncontaminated location for electromagnetic observatories.

A 10,000-person settlement would require an initial 20 to 30 tons of material from Earth to be placed on the lunar surface to begin operations. It is imperative that a lunar settlement use materials already on the Moon to ramp up production capability. For each kilogram of material produced from resources already on the Moon, more than 61 million joules of energy can be saved. An additional benefit is that the lunar regolith is in fine particle form with significant surface area, thus eliminating the need for comminution, one of the most expensive costs associated with ore processing.

Construction of a Domed City

Producing lunar building materials involves both chemical engineering and space manufacturing. The lunar regolith lends itself to engineering and manufacturing by virtue of its major constituents: oxygen, iron, titanium, silicon, magnesium, and aluminum. Silicon can be utilized to create high-strength glass. Titanium, iron, magnesium, and aluminum are valuable components of structural materials. Oxygen can be used in the manufacture of ceramics. Chemical processes that can produce metals, ceramics, glasses, powders, and fibers have already been built and tested. One of the most promising processes is the hydrofluoric acid leach system.

Once mill stock materials become available, it will be necessary to begin building more processing and upgraded manufacturing capability, as well as vehicles and construction equipment. The first vehicles built will be relatively small; however, later vehicles and machinery will include those on the scale of a mining bucket wheel.

This base, which will evolve into a city, provides a safe haven during initial development and during any breach that causes depressurization of the dome. The underground base, therefore, continues to provide protection from damage to the dome structure, even after completion.

Damage Control

To protect against catastrophic damage to the domes, apertures comprising four times the area of the largest expected breach of the dome will have the capability to port air into atmospheric cryogenic condensers at the speed of sound. This would allow for the recovery of 4/5ths of the atmosphere in the event of an irreparable breach. Maintenance and repair machines on both the inside and outside of the dome will deal with the maintenance and replacement of damaged polygons in the dome structure itself.

The dome must be designed to prevent the propagation of damage from a surface patch blowout. If breached, the system must repair the blowout and limit the risk to personnel on the ground. Breaks in the dome will be sealed by exterior repair machines which stretch over and seal several cells. Additional repair equipment must be capable of using cables to bridge and patch a break larger than several cells. Major cryogenic condensers at 30 degrees Kelvin situated beneath the dome floor will be capable of condensing some or all of the atmosphere, depending on the nature of the damage and how early it is detected. Emergency personnel systems could transport colonists to the underground city or safe harbors within the dome, all of which will be able to withstand vacuum. Mobile systems will seek out and protect people caught out in the open on the surface, on the dome, or outside the habitat.

Finding a Source of Nitrogen

While the lunar regolith is almost 50 percent oxygen, the nitrogen composition in the lunar regolith is not enough to build this system without modifications. This issue can be mitigated by building smaller, interconnected domes or by obtaining nitrogen and other cometary gases from the lunar polar craters. Gasses may potentially be found in the regions of Kepler and Aristarchus, as evidenced by the planetary probes and Apollo, which discovered out-gassing from the lunar interior via the detection of radon-222 atoms above the surface of the Moon.

Success Requires Leadership

There is no question that a domed city on the Moon is technologically viable. The technology development required for this project will directly result from the technology required for large-scale space solar power satellites and helium-3 production. If these precursors are developed, this lunar dome project would be a natural next step.

The only question remaining is whether a lunar domed city is politically feasible. Endeavors such as this one require sound technical leadership. Recent examples of such leadership enabling stunning technical successes include Count Ferdinand von Zeppelin, General Lesley Richard Groves (Manhattan Project), Admiral Hyman George Rickover (Nuclear Navy), and General Bernard Adolph Schiever (Air Force, Ballistic missiles and derivatives). This kind of leadership will be necessary in order to implement a phased, multi-year development plan to build up the required lunar infrastructure.

Once sound leadership is established, project success is merely a matter of addressing and solving material, chemical, and engineering issues. The design of large-scale human colonies on the Moon and beyond is no longer a responsibility that lies exclusively with the authors of science fiction. The question is not whether a domed Moon base is technologically viable. It is. The question now is, when will the vision be joined by sound leadership?

Edward McCullough has worked in aerospace for 20 years as a technical polyglot (photonics, chemistry, geometric situational awareness, autonomy, nuclear engineering, etc.) with large-scale industrial engineering and advanced research in chemical processes for lunar applications.


2018 International Space Development Conference Get the NSS NASA Federal Credit Union Credit Card Ad Astra Magazine Shop Amazon Enterprise In Space
Help NSS Improve Our Website By Providing Your Input

Help NSS Improve Our Website By Providing Your Input

How do you feel about the new NSS web site? Let us know what you are thinking so we can make our site better for you and our other visitors. 

Pin It on Pinterest

Share This